PocketWizard FlexTT6 - Canon

The FlexTT6 for Canon is the latest of PocketWizard's flagship TTL radios. With new under-the-hood technology, the FlexTT6 is compatible with the 5D Mark IV, 1D X Mark II, 80D, 77D and T7i, along with Canon's 600 EX II-RT and 430 EX III-RT flashes.

The FlexTT6 transmits to any PocketWizard receiving radio unit, including the FlexTT5, and has all the great features photographers have come to rely on with other PocketWizard TTL products: HSS, Patented HyperSync, and Interference-Free Reliability.

Specifications

• TTL Compatibility: Canon E-TTL II
• Frequency:
• FCC/IC model: 340.00-354.00 MHz North America
• CE model: 433.44-434.42 MHz EU/Asia/Other
• Channels:
• 52 Channels over 26 Frequencies (FCC/IC)
• 35 Channels over 5 Frequencies (CE)
• Antenna: 2.7" (6.9 cm) rubberized with 180 degree swing
• Transmit output power: Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
• Mounting: Hot Shoe, 1/4-20, lanyard, velcro
• Maximum Shooting Rate Frames per second (fps): 8 fps for E-TTL II and normal triggering
• Power / Channel Switch: OFF - C.2 - C.1
• Zone Select Switch: A-B-C (matches Canon slave groups)
• Status Indicator: LED: Green, Amber, Red status indications
• Camera / P1 Port:
• 1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous
• Tip = Trigger
• Ring = Pre-Trigger
• Sleeve = Ground
• Flash / P2 Port: 1/8" (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized
• Minimum Receive Contact Time:
• Camera / P1 Port = 80 milliseconds
• Flash / P2 Port = 500us
• Voltage Present: 3.3 VDC (all pins) - safe for all cameras
• Hot Shoe voltage protection: Hot Shoe: up to 50V
• USB: USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground
• Operating Temperature: Above -15° C (5° F) and below 50° C (120° F).
• Storage Temperature (without battery): Above -30 C (-22 F) and below 85 C (185 F)
• Construction:
• High impact plastic, captive battery door
• Hot Shoe made of glass reinforced resin
• Power: Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB
• Battery Life: 60 + Hours
• Dimensions: 9.2 cm (3.6") long x 7.3 cm (2.9") wide x 3.6 cm (1.4") tall, antenna lowered
• Weight: 5.4 oz (153 grams) 3.8 oz (108 grams) without batteries
• Included in the box: FlexTT6 Transceiver, USB cable, Two (2) AA batteries